Acorp WR-G+ Guia do Utilizador descarregar pdf (Página 8)

WR-G+ 54M Wireless Router User Guide

- 5 -

Name Action Description

Not lit No Power

PWR

Lit up Power on

Lit up The router is initializing

Flashing The router is working properly

SYS

Not lit The router has a hardware error

Not lit There is no wireless device linked to the device

WLAN

Flashing The Wireless function is enabled

Not lit There is no device linked to the corresponding port

Lit up

There is a device linked to the corresponding port but no

activity

WAN,1-4

Flashing There is an active device linked to the corresponding port

Table 2-1 The LEDs description

2.3.2 The Rear Panel

The rear panel contains the following features. (View from right to left:)

¾ AC power socket: only use the power adapter supplied with the WR-G+

54Mbps Wireless Router, use of a different adapter may result in product damage.

¾ Four 10/100Mbps RJ45 LAN ports for connecting the router to the local PCs

¾ RJ45 WAN port for connecting the router to a cable, DSL modem, or Ethernet

¾ Factory Default Reset button

¾ There are two ways to reset the router's factory defaults:

1) Use the Factory Defaults function on System Tools -> Factory Defaults page

in the router's Web-based Utility.

2) Use the Factory Default Reset button: First, turn off the router's power. Second,

press and hold the default reset button then turn on the router's power, until the

SYS LED lights up (about 3 seconds). Last, release the reset button and wait

for the router to reboot.

Note: Ensure the router is powered on before it restarts completely.

¾ Wireless antenna

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 69 70

Sem comentários

Acorp WR-G+ Guia do Utilizador Página 8